座驾式压路机-承德压路机-山东通华机械

下面是山东通华机械厂---你压路机根据公路类型(等级)来选型

1、对于一、二级干线公路和汽车路，应使用6~10t的具有较高压实能力的大型振动压路机;对于三级以下的公路，或不经常进行压实作业时，h好配备2t左右的机动灵活的振动压路机。

 for the first&second grade national trunk roads&spe---l roads for automobiles， 6-10t large-scale vibratory roller with high compaction capacity should be used; for the highways below the third xgrade，/when compaction operationxs are not often carried out，压路机小型， it is better to equip with about 2t mobile&flexible vibratory roller.

2、对于水泥混凝土路面，可采用轮胎驱动式串联振动压路机;

for cement concrete pavement， tyre-driven series vibratory roller can be used.

3、对于沥青混凝土路面，小压路机，应选用全驱动式振动压路机;

for asphalt concrete pavement， full-drive vibratory roller should be selected.

4、对于高j级路面路基的底层，h好选用轮胎压路机或轮胎驱动振动压路机进行压实，承德压路机，以获得均匀的密实度;

 for the bottom of high-grade pavement subgrade， it is better to use tyre roller/tyre-driven vibratory roller for compaction， in order to obtain uniform density;

5、修补路面时可选用静力作用式光轮压路机。

 when repairing the road surface， the static acting light wheel roller can be selected.